

Dedicated to third generation Chevy Novas 68-74

Project Photo's 2006

Photo Record [1998] [2002] [2003] [2004] [2005] [2006]

Starting to repair Passenger side Quarter Panel. Rather than try to reshape the smashed body lines, I elected to replace the quarter skin.	Quarter Panel was removed and minor rust was found around the inner wheel well.	Quarter Panel was removed and minor rust was found around the inner wheel well.
Inner wheel well and support trunkcleaned and POR-15 rust treatmentpaint applied	I choose to add sheetmetal backing plates behind the buttweldquarter panel seems	I used some "cleekos" to hold the quarter panel and the backing plates in place
Quarter Panel Skin trimmed and fitted. All ready to be welded	The Quarter Panel was slowly welded in place with small stitch welds	Completely Welded! The welds are ground down
Evercoats Rage Extreme Body filler was used to smooth the transition seems.	Two Coats of OMNI 170 Epoxy Primer was applied	Evercoat's FeatherFil G2 Polyester primer was applied